Gothic Gorget & Shoulders

Your squire buckles the straps of your custom-fit Gothic Armour, adjusting it to be comfortable and snug over your gambeson. You paid top coin for this suit of plate, and you expect people will be impressed when they see how it shines on the battlefield.

Your blacksmith assured you that the Gothic Armour design was the latest in technology, able to withstand and deflect attacks--even arrows from the enemy’s bows. You are a mighty warrior, indeed, to be the owner of such fine craftsmanship. A fitting symbol of your godly-given status.

DETAILS

Epic Armoury’s Gothic Gorget & Shoulders is fully articulated and designed to provide protection for the throat, neck and shoulders while minimizing the exposure of weak-spots. The armour is a four-piece set: a two piece gorget and two shoulders. The gorget covers the thorax to the sternum and is furnished with several ridges and two large octagonal besagues (round metal shields) to protect the notoriously under-armoured armpits from arrow-strikes. The two parts are fitted together with vegetable tanned top-grain leather straps. The gorget also provides fastenings for the shoulders. The shoulders are composed of articulated spaulders covering the shoulder-joint and upper arms, reinforced with large pauldrons sculpted to look like dragon’s wings to further protect the armpits. The shoulder plates are strapped on at the gorget and around the upper arms.

The Gothic Arm Protection is made from mild steel with rolled edges that form ridges around the rims. The design is historically inspired by the renaissance, but the style and functionality is fully interchangeable with other Epic Armoury armours, allowing freedom to combine armours and customize a character’s looks to fit your needs.

Available in size Medium/Large.

HISTORY

• Gothic style historically developed in the 1420-1440s thanks to technological advances
• Characterized by the curves, flutes and ridges, which strengthened the armour and deflected projectiles

• Made from 1mm/19 gauge thick mild steel
• Rolled edges with no sharp edges
• Straps and fittings made from top-grain leather
• Hand made, welded pieces for maximum durability
• Polished steel finish

Epic Armoury metal works products should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.

Cleaning

If your armour does get wet, it is important that you dry it thoroughly as soon as possible.

After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.

Rust-Prevention and Removal

Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.

Leather Straps and Fittings

Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.

You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.