You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran’s word, and you find yourself relieved not to shoulder such a heavy burden.
“We must fight!” your officer shouts for all to hear. You adjust your Warrior Leg Protection, double checking the buckles as you listen to him continue. “For our homes and for our families, we will fight until we can fight no more!” With a resounding cheer, your fellow soldiers ready themselves for the charge. You withdraw your weapon, eager and afraid all at once.
The battle has begun.
Epic Armoury’s Warrior Leg Protection is a set of demi-greaves designed to protect the shins. Rounded at the edges and decorated with shiny steel rivets, these demi-greaves are designed to sit comfortably over the shins while leaving room for poleyns to cover the kneecaps. They reach from below the knee and narrow around the ankles, secured with a top-grain leather straps below the knee and another above the ankles.
The Warrior Leg Protection demi-greaves are neutral in style and fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.
Available in sizes Small, Medium and Large.
- Plate armour became more popular as firearm technology became more prevalent during the 13th century
- May also be referred to as a “schynbald,” only protecting the front of the lower leg
- Made from 1mm/19 gauge thick mild steel
- Rolled edges with no sharp edges
- Straps and fittings made from top-grain leather
- Hand made, welded pieces for maximum durability
- Polished steel finish
Epic Armoury metal works products should still be treated with oil and kept in dry storage. All our metal armours contain leather parts that need regular maintenance using leather-care products to keep the leather from drying out.
If your armour does get wet, it is important that you dry it thoroughly as soon as possible.
After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality machine or mineral oil. Alternatively, you can apply a coating of wax to the entire surface of exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.
Rust-Prevention and Removal
Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in paste wax, oil, or water-displacing liquid.
Leather Straps and Fittings
Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.
You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.